Đầu dò khói chống cháy nổ BOSCH DO1101A-Ex

Đầu dò khói chống cháy nổ BOSCH DO1101A-Ex

Giá: 10,230,000 (ĐÃ CÓ VAT)

Thông tin nhanh về sản phẩm

  • Tên sản phẩm: Đầu dò khói chống cháy nổ BOSCH DO1101A-Ex
  • Mã sản phẩm: BOSCH DO1101A-Ex
  • Hãng sản xuất: BOSCH
  • Xuất xứ: Asia
  • Đầu dò khói chống cháy nổ BOSCH DO1101A-Ex
  • Đầu dò khói cho khu vực chống cháy nổ.
  • Nguồn điện 16-28VDC.
  • Vùng dò khói: 120m2
  • Elegant, compact and robust design
  • Deception-proof operating behaviour
  • High level of resistance to temperature fluctuations, humidity, corrosion and contamination
  • High resistance to interference through current gain
  • Bảo hành: Chính hãng 1 năm
  • Lắp đặt: Chưa bao gồm vật tư và chi phí lắp đặt
  • Giao hàng: Miễn phí
  • Xem thêm thông tin: www.namlong.vn

Sản phẩm cùng loại

016519 IR3 Flame Detector, explosion-proof
Flame detectors are used to detect open flames indoor and outdoor. They respond to the light emitted from flames during combustion. Flame detectors are especially suitable for smokeless liquid and gas fires not visible for the naked eye as well as for fires of materials that contain carbon with strong smoke emission. Typical areas of application are large industrial warehouses, airplane hangars, chemical facilities, oil refineries, machine rooms, ferries and freight ships, power plants, printing plants, wood warehouses, subway tunnels. Flameproof equipment is contained in an enclosure so strong that an internal explosion will neither damage the enclosure nor be transmitted outside of it. The surface remains cool enough not to ignite the explosive mixture.
 
Functions
Most IR flame sensors respond to 4.3 μm light, emitted by hydrocarbon flames. By responding to 0.75 to 2.7 μm light emissions from fires almost all flickering flames can be detected. The flame detector has three IR sensors. The detector discriminates between flames and other light sources by responding only to particular optical wavelengths and flame flicker frequencies. False alarms due to factors as flickering sunlight are avoided by a combination of filters and signal processing techniques. Low-frequency detection enables the sensor to operate through a layer of oil, dust, water vapour, or ice. An alarm is indicated via increasing supply current consumption (2-wire) or via relay contact (4-wire). The alarm current also illuminates the red LED of the detector.
 
Specifications
Detector (W x H x D) 146 x 150 x 137 mm
Cable gland entries 3 x 20 mm
Terminal functions  
1 – 2 Supply in connections or 2-Wire connections +IN and -IN
3 – 4 Remote test input connections +R and -R
5 – 6 Alarm Relay RL1 connections
7 – 8 Fault Relay RL2 connections
Operating voltage 14 to 30 V DC
Current consumption, 2-Wire configuration  
Standby 4 mA
Alarm 20 mA
Current consumption, 4-Wire configuration  
Standby 8 mA
Alarm 20 mA
Housing material Copper Free Aluminium Alloy (LM25)
Housing color Red
Weight 2.5 kg
Protection category (EN 60529) IP66
ATEX Ex II 2GD Ex d IIC T4 GbEx tb IIIC T135 Db IP66 A21
IECEx Ex d IIC T4 GbEx tb IIIC T135 Db IP66 A21
Permissible operating temperature -10 to +55°C
Permissible storage temperature -20 to +65°C
Relative humidity 95%, no condensation
Detection principle Detection of low frequency (1 to 15 Hz) flickering infrared radiation
Operating wavelength band 0.75 to 2.7 µm
Detection area 90° cone
Sensitivity High (Class 1 ) and Low (Class 3 )
Range Class 1: 0.1 m² n-heptane at 25m Class 3: 0.1 m² n-heptane at 12m
 

Sản phẩm cùng nhóm

Hỗ trợ mua hàng Hỗ trợ mua hàng
(028) 3995 5880 - (028) 3997 1540 - (028) 3997 3174
Hỗ trợ Viber/ZaloViber / Zalo:
0938 473 168 - 092 888 2345 - 0932 794 168